Digital photoelasticity of glass: A comprehensive review

The recent advances in digital photoelasticity have made it possible to use it conveniently for the stress analysis of articles and components made of glass. Depending on the application, the retardation levels to be measured range from a few nanometres to several thousand nanometres, which necessitates different techniques and associated equipments. This paper reviews the recent advances in the photoelasticity of glass with a focus on the techniques/methods developed in the last decade. A brief introduction to the residual stress in glass is provided initially to bring out its tensorial nature. The subsequent sections are organised thematically rather than chronologically, for better readability and easy access of information.     

Effects of initial crystal size of diamond powder on surface residual stress and morphology in polycrystalline diamond (PCD) layer

Polycrystalline diamond compacts (PDC) were synthesized using diamond powder of average crystal size 3-20 μm by the Ni 70 Mn 25 Co 5 alloy infiltration technique at high temperature and high pressure (HPHT).The surface residual stress of polycrystalline diamond (PCD) layer was measured using micro-Raman spectroscopy with hydrostatic stress model and X-ray diffraction (XRD).Measurements of the stress levels of PCDs show that the residual compressive stresses range from 0.12 to 0.22 GPa,which increase with th...     

A Fast Electrochemical Quartz Crystal Microbalance,which Acquires Frequency and Bandwidth on Multiple Overtones

An electrochemical quartz crystal microbalance (EQCM) is described, which measures the shifts of frequency and bandwidth on multiple harmonics with a time‐resolution of 10 milliseconds. The technique requires the process under study to be repetitive. Examples are square wave amperometry and cyclovoltammetry. Data acquisition is fast because the raw data consist of traces of the electrical admittance at fixed frequencies . A few (∼10) such time traces are acquired sequentially at a set of frequencies evenly spaced around the crystal's resonance. Since all time‐traces are triggered by the same repetitive process, plots of the conductance G (ω_i , t ) and the susceptance B (ω_i , t ) from constant time delays, t , versus frequency can be produced a posteriori. The shifts, ΔG (ω_i ) and ΔB (ω_i ) quantify a difference between two resonance curves, pertaining to the sample's reference state and the state at time t . Fitting a difference of two resonance curves to these data, one obtains shifts of frequency, Δf (t ) and shifts of bandwidth, ΔΓ(t ), versus time. This procedure is repeated for the different overtones. Given the repetitive nature of the process, one may accumulate and average, which lowers the noise down to a few tens of mHz. The capabilities of this instrument are demonstrated with two examples, which are copper deposition/dissolution and electro‐responsivity of a polymer film containing weakly acidic side groups.     

三维动态裂纹问题的超奇异积分方程法

基于弹性材料的动态基本方程，结合广义Betti-Rayleigh互易等式与时域下的边界积分方程，推导得到时域下的超奇异积分方程组。引入Laplace域下的动态基本解，将经过主部分析的积分核函数分解为静态和动态部分，其中动态积分核不具有奇异性。在裂纹前沿附近单元，采用与理论分析一致的平方根位移模型。结合Lubich时间卷积实现拉氏变换，采用配置点法计算超奇异积分，获得问题的数值解。并针对椭圆裂纹算例编写Fortran程序，得到冲击荷载作用下张开型裂纹的动态应力强度因子变化规律，数值结果稳定且收敛速度快。     

CALCULATION FORMULAS FOR PRINCIPAL STRESSES

在前人工作的基础上,运用一元三次方程的理论直接求解应力状态的特征方程,得到了实用的主应力计算公式.     

水胁迫下典型盐生植被梭梭光谱特征分析

荒漠地区由于气候干燥，降水稀少，水分常成为制约植被生长的因素之一，水分胁迫对植物长势和产量的影响比任何其他胁迫都要大。随着高光谱技术的发展，国内外已有众多学者利用高光谱数据研究植被遭受胁迫作用，然而这些研究对象多集中于甜菜、棉花、玉米、水稻等作物，针对干旱区盐生植被遭受胁迫作用的研究较少。梭梭作为荒漠、半荒漠地区的典型盐生植被之一，具有极高的经济和生态效益。选择梭梭作为研究对象，培育一年生梭梭，并设置三个水分梯度，形成受不同水分量胁迫的梭梭。使用原始光谱、红边位置参数，结合植被指数及二维相关光谱研究其叶片光谱特征，为干旱区利用高光谱遥感监测盐生植被提供借鉴。结果表明：(1)分析梭梭叶片反射光谱曲线发现，在可见光至中红外各波段范围内，受不同水分量胁迫作用的梭梭叶片光谱反射率有显著差异。在可见光(350～610 nm)波段，各水分处理的梭梭叶片反射率依次为100 mL>500 mL>200 mL，这是由于100和200 mL水分促进梭梭内部叶绿素合成，使该波段反射率降低，而过多的水分(500 mL)对梭梭内部的叶绿素合成没有更大的促进作用。在红光区(611～738 nm)，随着水分量的增多，受不同水分量胁迫的梭梭叶片光谱反射率依次减小。在738～1 181和1 228～1 296 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：200 mL>100 mL>500 mL；在1 182～1 227 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：100 mL>200 mL>500 mL。这是由于植被细胞结构对近红外区域的反射率影响较大，因而受不同水分胁迫作用的梭梭叶片光谱反射率有显著差异。在1 300～1 365和1 392～1 800 nm波段，受各水分胁迫作用的梭梭叶片反射率为：100 mL>200 mL>500 mL。这表明在500 mL水分胁迫量范围内，水分越多，叶子的细胞液、细胞膜对水分的吸收能力越强，使得反射率下降。通过对原始光谱求取一阶导数并提取红边位置参数发现，各水分处理下的梭梭叶片一阶微分光谱曲线中红边位置未发生移动。这是由于梭梭在长期的干旱环境影响下，形成了特殊的适应机制，水分对其红边位置影响不敏感。(2)选取若干植被指数分析各水分处理下的梭梭光谱指数变化。当水分胁迫量由100 mL增至200 mL时，WI/NDWI，MSI和NDII指数值变化显著，可用于研究水分胁迫下梭梭的光谱特征。(3)使用二维相关光谱技术分析受各水分胁迫作用的梭梭光谱特征，得出在100 mL水分胁迫下，在536，643，1 219和1 653 nm波段处，吸收峰对水分的微扰敏感；在200 mL水分胁迫下，在846和1 083 nm波段处，吸收峰对水分的微扰敏感；在500 mL水分胁迫下，在835和1 067 nm波段处，吸收峰对水分的微扰敏感。总之，在近红外波段，与100 mL水分量相比，梭梭受200和500 mL水分量胁迫时，吸收峰对水分的微扰敏感度上升。由100 mL水分胁迫下梭梭的二维同步相关谱图可知，1 044和1 665 nm，1 072和903 nm，903和1 264 nm，1 230和1 061 nm波段处形成正交叉峰，表明这些波段处光谱强度随水分的干扰同时变化。     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

Degradation of a polyester‐urethane coating: Physical properties

In this article we studied the evolution of thermomechanical properties of a polyester‐urethane coating during degradation under different degradation conditions, i.e., aerobic and anaerobic conditions with and without dry/wet cycling during degradation. Dynamic mechanical and thermal analyses show that under aerobic conditions the coatings become stiffer and more brittle in the glassy state. This stiffening is probably due to the increase in the amount of hydrogen bonding and the formation of oxidized groups which increase the polarity of the material and enhance the interactions of the polymer segments. However, oxidation reactions result in a considerable decrease in cross‐link density and stiffness in the rubbery state. Both changes, in the glassy and rubbery states, give rise to development of internal stresses. These stresses increase as the degradation process proceeds. Nevertheless, for samples exposed to anaerobic conditions, the stiffness remains constant in the glassy state and the cross‐link density slightly increases as a result of degradation. This reconfirms the dominance of the effect of oxidation reactions on the mechanical failure of the coatings. Oxygen permeation measurements show a more‐or‐less time‐independent diffusion coefficient and a gradual decrease in solubility of oxygen as a function of exposure time. This results in a slight decrease in oxygen permeation (mainly in the early stage of the degradation) as degradation proceeds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 659–671     

HTPB复合底排药压缩屈服应力模型研究

目前广泛应用于底排增程技术的 HTPB 复合底排药 (composite base bleed grain,CBBG) 是一种颗粒填充含能材料,战场环境中将承受冲击、温度等载荷作用. 为研究 HTPB CBBG 冲击压缩力学性能,进行了不同温度 (233$\sim$323 K) 和应变率 (1100$\sim$7900 s$^{-1}$) 下的分离式霍普金森压杆实验. 实验结果表明,各工况下,应力应变曲线均呈现屈服-$\!$-应变硬化特征,HTPB CBBG 保持高韧性. 提高应变率和降低温度均导致相同应变下的应力幅值上升,但温度较应变率对HTPB CBBG 冲击压缩力学性能的影响更为显著. 基于所研究温度范围高于 HTPB CBBG 玻璃化转变温度,通过将水平、垂直移位因子与温度的关系表示为 WLF 方程的形式,将时温等效原理引入协同模型,并计及内应力的应变率增强效应,提出了一种新的屈服应力模型.选取参考温度,利用水平、垂直移位因子-$\!$-温度曲线和屈服应力主曲线拟合模型参数.模型预测值与实验数据对比结果表明:该模型可准确表征 233$\sim$323 K 时 HTPB CBBG 屈服应力的双线性应变率相关性,明确了较低和较高应变率时,应变率效应分别主要由内应力和驱动力贡献.